On 2001-04-14 classiccmp_at_classiccmp.org said to kees.stravers_at_iae.nl
8< snip >8
>I am also looking for the pinout of the TK50 connector if anyone
>has it.
>-tony
TUK50 board J1 Connector signals and pin numbering
-----------------------------------------------------------------
Pin number Signal name Pin number Signal name
-----------------------------------------------------------------
J1-01 Ground J1-14 DR RD CLK L
J1-02 WRT Data H J1-15 DR RD CLK H
J1-03 WRT Data L J1-16 Ground
J1-04 Ground J1-17 Read Data L
J1-05 DR CMD H J1-18 Read Data H
J1-06 DR CMD L J1-19 Ground
J1-07 Ground J1-20 DR Status H
J1-08 WRT Gate H J1-21 DR Status L
J1-09 WRT Gate L J1-22 Ground
J1-10 Ground J1-23 DR WRT CLK H
J1-11 Erase L J1-24 DR WRT CLK L
J1-12 Erase H J1-25 Ground
J1-13 Ground J1-26 Ground
-----------------------------------------------------------------
BTW, I am looking for a TUK50 board if anyone has a spare.
My 11/84 won't read TK50 tapes. The drive is OK, and sending
commands direct to the CSR of the board does not provoke a
reaction, so I assume the board is broken.
Kees.
--
Kees Stravers - Geldrop, The Netherlands - kees.stravers_at_iae.nl
http://www.iae.nl/users/pb0aia/ My home page (old computers,music,photography)
http://www.vaxarchive.org/ Info on old DEC VAX computers
(Mirrors: http://vaxarchive.khubla.com/ and http://vaxarchive.sevensages.org/)
Net-Tamer V 1.08.1 - Registered
Received on Sat Apr 14 2001 - 07:43:52 BST