> The receivers are a bit more interesting. The spec says that their
> threshold must be between 1.3 and 1.7 volts and that their high-level
> input current must be no greater than 80?A;
> Are there any bus receiver chips that have a reference-voltage pin,
> which could be connected to (say) 1.5V?
You can use open drain CMOS buffers/inverters in this way by setting
the supply volts to give the desired ViH point (check the data sheet
but ViH * 2 is about right). The outputs are at least TTL volts
tolerant used like this.
Lee.
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
Received on Tue Jan 20 2004 - 04:27:29 GMT