bci-20.htm

From: Daniel A. Seagraves <dseagrav_at_bsdserver.tek-star.net>
Date: Tue Aug 26 09:18:49 1997

   BCI-2000
   
   
   bci2000
   
   
   
   
   
   
   
   
Unibus
Adapter for
the PCI Bus

   
     _________________________________________________________________
   
   
   
   The BCI-2000 Unibus Adapter enables Unibus devices to be connected to
   workstations supporting the PCI bus. The BCI-2000 supports both PIO
   and DMA Unibus data transfers as well as providing support for all
   four Unibus interrupt levels.
   
   The BCI-2000 consists of a single slot PCI controller, a dual-width
   Unibus cable adapter module, and an eight-foot shielded interconnect
   cable. The PCI controller occupies a single PCI slot. The Unibus cable
   adapter installs into the Unibus connectors A and B of an expansion
   chassis or user's equipment, replacing a Unibus cable.
   
   The BCI-2000 provides complete support for:
     * Unibus PIO data transfers including read word, data-input-pause,
       write word, and write byte.
     * Unibus DMA data transfers including read word, write word, and
       write byte.
     * All four Unibus interrupt levels: BR4, BR5, BR6, and BR7.
       
   
     _________________________________________________________________
   
Features

   Provides a migration path. The BCI-2000 allows users of Unibus systems
   to migrate to the new high performance PCI workstations and retain
   their existing Unibus I/O devices without loss of function or
   performance.
   
   High performance. Unibus PIO and DMA data transfers occur at maximum
   Unibus speeds -- throughput is limited only by the Unibus device.
   
   Cost savings. The BCI-2000 provides users the choice of low cost, high
   performance PCI workstations while retaining their existing
   investments in Unibus hardware and software.
   
   Easy to install. The BCI-2000 allows multiple I/O devices to be
   connected to a workstation while occupying only a single PCI-slot.
   
   Easy to maintain. The BCI-2000 executes a comprehensive set of
   diagnostics to automatically verify module operation.
     _________________________________________________________________
   
Description

   PIO Transfers The BCI-2000 supports the four types of Unibus PIO data
   transfers including read word, data-input-pause, write word, and write
   byte. The entire Unibus address space is available for access by a PCI
   host.
   
   DMA Transfers The BCI-2000 provides full compatibility with the three
   types of Unibus DMA data transfers, including word read, write word
   and, write byte. Single and multiple data transfers are supported.
   
   Interrupts The BCI-2000 passes Unibus interrupts to the host for
   service if interrupts are enabled by the host and the interrupts are
   higher priority than the priority established under software control.
   The BCI-2000 stores the 8-bit interrupt vector in an internal register
   that is referenced by the host to determine the interrupt service
   requested.
   
   Unibus Termination The BCI-2000 provides Unibus termination for one
   end of the Unibus. The user must ensure the Unibus is terminated at
   the end of the Unibus within the expansion chassis or the user's
   equipment.
   
   Unibus Parity Unibus parity signals PA and PB are terminated but
   otherwise not supported by the BCI-2000.
     _________________________________________________________________
   
Software Compatibility

   
   
   The BCI-2000 is not supported under existing OpenVMS, Ultrix, or OSF/1
   operating system software and requires software drivers to support the
   features offered bu the BCI-2000. Consult our factory for more
   information.
   
Specifications

   Physical Dimensions PCI controllerSingle width card, 6.875 inches by
   4.2 inches (17.46 cm by 10.67 cm) Unibus Cable AdapterDual-width
   Unibus module, 5.s inches by 2.3 inches (13.s cm by 5.8 cm.) Cable
   Length8 ft. Electrical BCI-2000-A3.8 amps _at_ 5.0 volts (+/- twelve
   volts not used) Bus Loading1 dc load, 2 ac loads Bus Drive
   Capability19 additional dc loads Environmental Operating Conditions:
   Temperature 5° to 50° C (41° to 122° F) Relative Humidity20% to 80%
   noncondensing Storage Conditions: Temperature-40° to 66° C (-40° to
   150°F) Relative Humidity10% to 95% noncondensing
   
Ordering Information

   
   BCI-2000-CAPCI controller without memory, Unibus cable adapter, 8-foot
   cable and user manual. BCI-2000-AAPCI controller with 256KB memory,
   Unibus cable adapter, 8-foot cable and user manual. BCI-2000-BAPCI
   controller with 1MB memory, Unibus cable adapter, 8-foot cable and
   user manual.
     _________________________________________________________________
   
   Digital, Unibus and OpenVMS are trademarks of Digital Equipment
   Corporation.
   UNIX is a trademark of X/Open Company Ltd..
   We reserve the right to improve our products without notice.
   
     _________________________________________________________________
   
    75 Gateway Boulevard, Cottage Grove, Oregon 97424 USA
    Tel: (541) 942-3610 Fax: (541) 942-3640
    E-Mail: sales_at_logical-co.com
    
   Logical's Home About Logical Product Info Warranty Support
     _________________________________________________________________
Received on Tue Aug 26 1997 - 09:18:49 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:24 BST