Darnit! UDA50 problem.

From: Philip.Belben_at_powertech.co.uk <(Philip.Belben_at_powertech.co.uk)>
Date: Tue Nov 4 10:23:31 1997

> > > Absolutely. The wire in question is between pins CA1 and CB1 on the _same_
> > > slot - the slot the control cart of the UDA50 is in. It's a little loop of
> > > wire, and is quite difficult to find the first time.
> >
> > Okay... I'll give it a shot! But if I foul up, I'm stuck - I don't have
> > a wirewrap tool.
>
> You can always solder a jumper back in place.

Oh, come on, Tony, _please!_

Individual socket pins from various types of connector (including D I
think) fit quite well over these backplane pins. Crimp or solder a
short length of wire to two of these and hey presto! A removable NPG
jumper. NB take care that these don't stick out so far as to foul on
the case...

Philip.
Received on Tue Nov 04 1997 - 10:23:31 GMT