34A Power Trouble. I calmed down, here's the facts...

From: Daniel A. Seagraves <dseagrav_at_bsdserver.tek-star.net>
Date: Tue Nov 11 11:08:32 1997

Alright. It wasn't powering on because I left J3 unplugged.
When I plug in J5 (4-wire plug on the line power module) everything goes.
I can plug in everything else, and all I get is a relay click.
I found the easy way to play with these plugs is to set the BA11
upside-down on the table, and unmount the PSU so I can get access.
What is J5 for and what voltages are supposed to be there?
I have an oscope here, and I may be able to dig out a VOM...
It's obvious I switched wires or something in the line power module.
Visual inspection shows nothing obviously wrong...
Received on Tue Nov 11 1997 - 11:08:32 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:34 BST