[11/34A] ARRRRGH!! <sound of head banging on wall>

From: Daniel A. Seagraves <dseagrav_at_bsdserver.tek-star.net>
Date: Wed Nov 12 16:57:56 1997

On Tue, 11 Nov 1997, Tony Duell wrote:

> On Tue, 11 Nov 1997, Daniel A. Seagraves wrote:

> Can you halt the CPU (RUN light off) from the panel? If not, then you've
> probably got grant problems.

That's it. When I push CTRL/HALT, I get BUS ERR.

> Try pulling the terminator (M9302 card, I
> think - anyway it's in the far left slot). If you can now halt the CPU
> from the panel, you've certainly got grant problems.
>

Okay... You're right. I've got grant trouble.

> OK. They're on the 3rd connector from the back (2 connectors behind them,
> 3 in front). They're the rearmost 2 pins on the righthand side (looking
> from the _TOP_ of the backplane). You'll find they're linked by a little
> loop of wire close to the backplane. That's what you should have cut.
>
> What, in fact, did you cut?

I have to look later, I have work to do.
Received on Wed Nov 12 1997 - 16:57:56 GMT