Call for final Elf99 design input

From: Eric Smith <>
Date: Thu Dec 3 15:08:48 1998

Ethan wrote:
> plated-through holes are cheaper than non-plated-through holes.

Only on a board that has both.

A board with no plated-through holes is cheaper than a board with
all plated-through. The plating is an extra manufacturing step.
Received on Thu Dec 03 1998 - 15:08:48 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:47 BST