OT, but info needed: RAM uprade

From: Jason Willgruber <roblwill_at_usaor.net>
Date: Wed Dec 23 01:46:12 1998

I do agree that 4 MB can do a good amount of stuff (even run IE3.02 for win
3.1). Minix would be great, but my friend wanted to have Win'95 on it,
which is why I threw in the 120MB HD and 14.4 modem. I figured that since
my IBM laptop runs Win'95 fairly good with a 386-20, 120MB HD, and 6 MB RAM,
that the Tandy (486-20) would run it great with 10 MB RAM, until I
discovered that the RAM wouldn't work, and it only has 4 MB.

Would a new BIOS chip solve the problem, or does the RAM limitation have to
do with the M/B? I know in my Tandy 1800HD (same as 3800HD, but a 286),
when I put in the 4 MB chips, the computer boots, and recognizes 1 MB out of
each of the chips, then runs down a huge list of memory errors, then works
fine (after the errors are done).

If a new BIOS won't work, has anyone ever ran Win'95 with 4 MB RAM? How
does it perform?

ThAnX,

--
                 -Jason Willgruber
               (roblwill_at_usaor.net)
                  ICQ#: 1730318
<http://members.tripod.com/general_1>
-----Original Message-----
From: Allison J Parent <allisonp_at_world.std.com>
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Date: Tuesday, December 22, 1998 7:11 PM
Subject: Re: OT, but info needed: RAM uprade
>
>I have run win3.1 in 2mb of ram and 40mb of disk(386/20).  Netscape would
>never run as they admit it want at least 5mb (and it's cranky at that).  I
>was able to run a lot of stuff and most dos programs successfully
>
>that was in '93 coad bloat would make that harder but at 4mb you could run
>quite a bit.  FYI, minix 3.0 in 4mb screams.
>
>Allison
>
>

Received on Wed Dec 23 1998 - 01:46:12 GMT