From: Bill Yakowenko <yakowenk_at_cs.unc.edu>
Subject: EPROM programming voltages
>Can anyone point me to an on-line reference showing the necessary
>voltages for programming various EPROMs? I'm especially interested
>in the oldies-but-goodies: 2708, 2716, 2732, and 2764's. In
>particular, it seems some of them want 25v while others want only
>21v, and I suspect that even the same chip number from different
>manufacturers may want different voltages.
2708 (looks like 12 volts according to a spec sheet in one of my
books.)
2716 25 volts
2732 25 volts
2732A 21 volts
2732B 12.5 volts
2764 21 volts
27C64 21 volts
2764A 12.5 volts
Source: EPROM Programmers Handbook for the C64 and C128 by CSM
Software.
--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Visit our web page at: http://www.goldrush.com/~foxnhare/
Call our Commodore 64 BBS (Silicon Realms 300-2400 baud) at: (209)
754-1363
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Received on Thu Feb 05 1998 - 21:01:08 GMT