Here's another 11/23+ question...

From: Allison J Parent <>
Date: Wed Feb 18 15:12:33 1998

<From: "Daniel A. Seagraves" <>

<How do I enable the console halt-on-break? Is there a switch on the CPU
<for that? It's the M8189 11/23+ CPU.

Remove the wire or jumper from J14. J14 is in the row of pins roughly
on the centerline of the board and is the fourth up from the card edge
fingers (the pin closest is J10).

Received on Wed Feb 18 1998 - 15:12:33 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:30:53 BST