Hey! A great way to bring this thread back on topic! How do those
electronic switches work, and what is the approximate network topology
of the system? Is there a reference guide to it somewhere? I'd love to
take a look.
>>From about the 1970s and on (somewhere around there...about the time
the
>first electronic switching systems start appearing)
***snip***
As far as I know, a telephone rings because when it's on hook, any
current on the phone line is connected to the ringer. When someone is
trying to connect, the company sends a periodic AC signal to the phone.
If the caller ID data signal was sent first, it would cause jittering in
mechanical ringers, and a maddening noise in electronic ones. When the
ring is detected, the caller ID can 'pick up' the phone line briefly to
check the data signal, which should be extremely brief. The station
knows to keep ringing the phone if the user has caller ID. This is my
theory.
>I don't know the specific reasons that are behind sending the data
burst
>after the first ring. It may have a lot to do with the caller ID boxes
>needing some sort of indicator to let them know a call was coming and
they
>should start monitoring for the carrier. I think the caller ID boxes
>could have easily been designed to continually monitor the line for a
>carrier and then capture the data that came before the first ring.
>
>Sam Alternate e-mail:
dastar_at_siconic.com
>-------------------------------------------------------------------------------
>Ever onward.
>
> September 26 & 27...Vintage Computer Festival 2
> See http://www.siconic.com/vcf for details!
> [Last web page update: 07/05/98]
>
>
______________________________________________________
Get Your Private, Free Email at
http://www.hotmail.com
Received on Wed Jul 15 1998 - 15:15:26 BST