wanted manuals for HP 9915

From: Joe <rigdonj_at_intellistar.net>
Date: Sat Jun 20 15:28:30 1998

At 03:21 PM 6/20/98 +0100, you wrote:
>>
>>
>> It's not a rack mount. It's too small for that. Mine are only about 6"
>> square and a foot long.
>
>Yes, that's the one I meant. I believe there was a rackmount kit for it
>from HP. wasn't there?

  I don't know but it would just aboud get lost in a rack!
>
>>
>> I would like to know the pinout for the connectors for the optional
>> keyboard and monitor. Also what the heck that "control" connector on the
>
>The monitor connector is a BNC, composite video.

  I figured that it was. It's probably made for the 82912 or 82913
monitor. Any idea on the "control" connector? Does your's even have that?
 It may be part of the keyboard/monitor interface option.
>
>One day, when I've got some time to spare I'll dismantle an HP85 and
>trace its keyboard connections to the custom chips. Then do the same
>thing for the connector on the 9915. It should then be possible to wire
>up a keyboard with the correct matrix.

  I think I have the schematic of the keyboard and it's controller for the
85. I need to open a 9915 and see if it has the same controller and trace
the wiring back to the connector.

>
>> back is for and how to use it. Also what extra fuctions are built into the
>> 9915 if any. And what the push buttons and indicators on the front are for.
>
>
>No idea on that, I'm afraid.

   I was hoping that someone on this list would have a manual for it.

  Joe
Received on Sat Jun 20 1998 - 15:28:30 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:05 BST