> Date: Mon, 29 Jun 1998 18:52:25 -0500
> Reply-to: classiccmp_at_u.washington.edu
> From: Russ Blakeman <rhblake_at_bbtel.com>
> To: "Discussion re-collecting of classic computers" <classiccmp_at_u.washington.edu>
> Subject: Re: UNIX jumper contd
> George Rachor wrote:
>
> > Those two slots were for memory. I use to use these for Unix back when
> > Intel was offering the Opennet product. Wow... A whopping 16 MByte of
> > RAM!
Funny, I have a 8mb intel card for intel's 386 motherboard. Oh
well, I missed the boat because I didn't grab the motherboard because
those boards didn't have bios eprom at a junkyard. :( If I did, I
would be begging Russ to copy those bios data! :)
Jason D.
(NOTE: reply by jpero_at_cgo.wave.ca or jpero_at_cgocable.net) Due to my
pmail program it assembled wrong email and there's no way to tell it
to use right address! This was caused by other external problems
that I had to resolve thanks to my stupid ISP messing with email
servers.)
>
> I had a generic 386 MB with a slot like that some years back and yes it did
> seem like the top of the workd with 16mb.
>
> > Do these systems have the 80387 co-processor installed? How about the
> > Weiteck?
>
> These are complete, with the Intel 80387-25 mat coprocessor and up to 8 30
> pin SIMMS, which are populated differently on each. My 17 yr old nearly had
> a hernia lifting these into the truck. Very well made and very smooth
> running machines though.
>
> --------------------------------------------------------------------
> Russ Blakeman
> RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
> Phone: (502) 756-1749 Data/Fax:(502) 756-6991
> Email: rhblake_at_bbtel.com or rhblake_at_bigfoot.com
> Website: http://members.tripod.com/~RHBLAKE/
> ICQ UIN #1714857
> AOL Instant Messenger "RHBLAKEMAN"
> * Parts/Service/Upgrades and more for MOST Computers*
> --------------------------------------------------------------------
>
>
>
>
email: jpero_at_cgocable.net
Pero, Jason D.
Received on Mon Jun 29 1998 - 15:01:58 BST