ASR33

From: Ward Donald Griffiths III <gram_at_cnct.com>
Date: Tue May 12 22:19:03 1998

wanderer wrote:
>
> Hi All,
>
> I recently acquired an ASR33 and I'm in need of some assitance in order
> to be able to let it work against my Unix box.

Tony Duel's response fits my memory on the wiring, but I really hope
your intent is to have the machine work _with_, not _against_ your
Unix box. Because if you want it to work _against_ your Unix box, I
can provide wiring diagrams that are extremely user-unfriendly (while
leaving the equipment intact for the heirs).

> At the back of the powersupply there is a terminal strip with a number
> of lugs. Question is, which lugs to use, the unit is an UCC-6
> (for private wire setups).
>
> Other problem is which voltage to use for the current loop to rs232,
> I have a converter, and uses 5 volt maximum, and do not know if that
> will work. If not, does someone then have a proper schematic?
>
> Thanks,
>
> Ed

-- 
Ward Griffiths
They say that politics makes strange bedfellows.
Of course, the main reason they cuddle up is to screw somebody else.
				Michael Flynn, _Rogue Star_
Received on Tue May 12 1998 - 22:19:03 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:12 BST