85mb Micropolis in a Microvax II?

From: Allison J Parent <allisonp_at_world.std.com>
Date: Mon Nov 23 11:10:37 1998

< In a BA23, you use the same cables (a 2nd set obviously) for the
< second DUA1: drive as the first drive. DON'T FORGET TO
< SET THE DUA1: DRIVE AS DS4!!!!!!!!!!!!!!! The cables

Correct.

< The I/O distribution panel in a BA23 allows for 2 hard drives
< and is intended for a dual RX50. I have never tried a dual RX33
< in a BA23 on an RQDX3, but I presume it would work. I don't

it does if the RQDX3 is the correct rev.

< know if the 2nd hard drive must be connected into the READY
< and WRITE PROTECT buttons. I have heard that the 2nd
< drive can float and that the default is READY and NOT
< WRITE PROTECTED.

Also correct. I happen to prefer to writelock the disk and make it not
ready before power off to avoid the risk of accidental writes(during power
up or down).

Allison
Received on Mon Nov 23 1998 - 11:10:37 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:20 BST