> From: Marion.Bates_at_Dartmouth.EDU (Marion Bates)
> Subject: VIC-20 -- no sound
>
> I have a VIC-20 that didn't come with a video cable, but I later found what
> appeared to be the right one. The part that plugs into the computer has a
> half-circle of five connectors, and on the other end there are two RCA-type
> plugs, one red and one black. Regardless of which one I plug into the
> "video-in" port on my TV, I get perfect video (why does it work with both?) --
> but no audio, whether I plug the second RCA plug into the left or the right
> "sound-in" jack on the TV. Is this the wrong cable, or is there a problem with
> using a stereo TV? (Or is there a fault somewhere?)
>
The video cable you have is probably for a Commodore 64, Atari 8-bit, or Sega
Genesis. There are two video outputs on the VIC video connector.
You should be able to locate a cable that has a 5-pin din to 4 RCA type plugs
- Radio shack used to sell them - I think they are (were) used in automobile
audio systems... With that you will find both video and audio output (but
watch out, there is also the +5v output in one plug too.) :/
BTW you're not missing much with the VIC-20 sound, the programmer's trick to
get better sound output is to keep the computer controlled sound volume low
(like 2 or 3) then the voices don't mess up each other as much.
--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Larry Anderson - Sysop of Silicon Realms BBS (300-2400bd) (209) 754-1363
Visit my Commodore 8-Bit web page at:
http://www.goldrush.com/~foxnhare/commodore.html
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Received on Mon Sep 07 1998 - 22:24:52 BST