What are the expansion port specs (if applicable) of an Atari ST?
Research on the internet turned up info about a cartridge port expander
made to connect a scanner to an ST via a Navarone Cartridge Interface
(ref:)
http://www.ataricentral.com/wwwboard/messages/366.html
Other found info:
Navarone Industries is (was) located at:
Navarone Industries, Inc.
510 Lawrence Expressway #800
Sunnyvale, CA 94086
(ref:)
http://cws86.kyamk.fi/Computers/Commodore/articles/Enhancing_Your_64/
---------------------------------------
Navarone apparently made stuff for the TI99. I wonder if it is a
pass-thru cart for the side connector of a TI99, where the speech module
connects to (I forget if the port is male or female)? Or, even though it
may not be as wide as a regular TI cart, does it slide into the front
cartridge connector anyhow and possibly be used for copying cartridges?
<insert standard liability disclaimer>
---------------------------------------
Jeff Salzman
>It certainly seemed about the right size for a 64 cartridge, but it doesn't
>work that way. Also, the passthru plug is a teeny big too large to easily get
>a cartridge to attach to it.
>
Received on Mon Sep 14 1998 - 12:16:25 BST