Pinouts needed

From: Don Maslin <donm_at_cts.com>
Date: Thu Aug 5 00:41:06 1999

On Thu, 5 Aug 1999, Jason (the General) wrote:

> Hi!
>
> Does anyone have the pinouts of both a a 25-pin and a 9-pin serial
> connection?
>
> I need to know which pins on the 9-pin correspond to the pins of the 25 pin.
>
> ThAnX,
> ///--->>>
> -Jason Willgruber
> (roblwill_at_usaor.net)
> ICQ#: 1730318
> <http://members.tripod.com/general_1>
>
 
====================================================================
 
           Alternate Asynchronous Adapter Connector
           Male 9=Pin D-Sub, cable requires female.
 
      DB9 I/O Description DB25
 
       1 < DCD (Data Carrier Detect) 8
       2 < RX (Receive Data) 3
       3 > TX (Transmit Data) 2
       4 > DTR (Data Terminal Ready) 20
       5 GND (Signal Ground) 7
       6 < DSR (Data Set Ready) 6
       7 > RTS (Request To Send) 4
       8 < CTS (Clear To Send) 5
       9 < RI (Ring Indicator) 22
 
====================================================================

                                                 - don
Received on Thu Aug 05 1999 - 00:41:06 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:48 BST