Monitor tilt - return it?

From: Dave Dameron <ddameron_at_earthlink.net>
Date: Tue Aug 31 20:03:28 1999

At 10:22 PM 8/31/99 EDT, you wrote:
>If the image is square but just tilted then the fix is usually easy. The
yoke
>is twisted on the neck of the CRT. Take the back off the case. Locate and
>loosen the locking screw, normally only one. Rotate the yoke to correct the
>tilt. Be very careful, many loose high voltages. I like putting a mirror in
>front of the screen so I can see where I put my hands.
>Good luck.
>Paxton
Or do the adjustment with the monitor (deflection coils and all) off and
CRT discharged. After 1 or 2, it's usually close enough.
-Dave
Received on Tue Aug 31 1999 - 20:03:28 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:31:51 BST