PCjr Problem SOLVED!

From: swolfe <swolfe1_at_mail.gcnet.net>
Date: Sun Dec 19 02:25:48 1999

I finally fixed the PCjr. After taking apart the sidecar, I found that the
board had some exess copper left over from when it was etched. I trimmed
the paths where the short was occuring (which was right near a memory IC )
and everything is working great now, includingthe second floppy drive which
was also defunct while the problem was being solved. Thanks everyone!


Shane Wolfe
CS Student
Frostburg State University
Received on Sun Dec 19 1999 - 02:25:48 GMT