Jerome Fine replies:
>
>If your question about a floppy drive for the MicroVAX II is in respect
>of a 5 1/4" drive, then the RQDX3 will accept either an RX50 or an
>RX33 (either single or dual). You require only the usual 34 pin cable
>for either drive, except that the connections on the drive side are different
>for the RX33 as opposed to the RX50. This assumes that you really do
Doesn't the RX33 require a higher rev. of the RQDX3 than is normally
available? ISTR, that I've got a whole pile of RQDX3's, but only one of
which is capable of driving a RX33.
OTOH, Tim's comment about the 3rd Party controller I suspect just did me a
big favor with the MV3 that I'm currently working on.
Zane
| Zane H. Healy | UNIX Systems Adminstrator |
| healyzh_at_aracnet.com (primary) | Linux Enthusiast |
| healyzh_at_holonet.net (alternate) | Classic Computer Collector |
+----------------------------------+----------------------------+
| Empire of the Petal Throne and Traveller Role Playing, |
| and Zane's Computer Museum. |
|
http://www.aracnet.com/~healyzh/ |
Received on Tue Dec 21 1999 - 11:44:51 GMT