> Dwight writes:
> > Back on the three phase issue, many shops use another
> > 3phase induction motor method to create needed three phases.
> > Some don't even use a starting capacitor. They simple
> > spin the motor with a pull rope and switch on the current.
>
> I'm definitely not going to try *that* approach with an RP06. :-)
>
>
Interestingly, RP06's do not use three phase motors. They use a 220
motor (two phases). The other drives some of the card cage logic for
the Massbus (DCL adapter?).
You can break the RP04-II/RP05/RP06 out to run on 220.
The RP04 was a true three phase motor driven item.
Bill
(almost exactly 15 years after RP06 maintenance training)
---
Bill Gates is a Persian cat and a monocle away from being a
villain in a James Bond movie -- Dennis Miller
bpechter_at_shell.monmouth.com|pechter_at_pechter.nws.net|pechter_at_pechter.ddns.org
Received on Fri Feb 05 1999 - 18:04:05 GMT