Jumpers for Maxtor XT-8760 ESDI disk?

From: Chuck McManis <cmcmanis_at_mcmanis.com>
Date: Sat Mar 6 01:43:12 1999

Yes there are quite a few, I'm not sure where the PCB part number is so
I'll give you various things and you can tell me if I got one you can use :-)

The MAXTOR chip is marked 'B73ED', There is a covered chip marked 9211 and
R140. There are 39 Jumpers on this drive, Mine are set as follows:

        Jumper State
        JP1 on JP20 on
        JP2 off JP21 off
        JP3 off JP22 on
        JP4 on JP23 off
        JP5 on JP24 off
        JP6 on JP25 on
        JP7 on JP26 off
        JP8 on JP27 off
        JP9 on JP28 off
        JP10 off JP29 off
        JP11 off JP30 off
        JP12 on JP31 off
        JP13 off JP32 on
        JP14 ?? JP33 off
        JP15 on JP34 off
        JP16 off JP35 on
        JP17 off JP36 off
        JP19 off JP37 on (between JP2 and JP3)
                                JP38 on
                                JP39 off

On the JDS1-7 pins I've got a jumper on JDS1 (presumably this selects it as
drive 1)

No other identifying marks as far as I can see...

Any help appreciated.
--Chuck

At 10:46 PM 3/5/99 -0800, Don Maslin wrote:
>On Fri, 5 Mar 1999, Chuck McManis wrote:
>
>> Does anyone have the jumper configuration for this drive?
>> --Chuck
>
>I have it, Chuck, but the problem is that some of it varies with the
>PCB part number. Is there any area in particular that you are looking
>for, or can you provide the PCB p/n?
> - don
>
>
Received on Sat Mar 06 1999 - 01:43:12 GMT