Emulex board question

From: Pete Turnbull <pete_at_dunnington.u-net.com>
Date: Tue May 4 22:15:51 1999

On May 4, 8:34, emanuel stiebler wrote:

> Correction, directly from the manual. RL01 or RL02 emulation ;-))
>
> But serious, there are two version of the SC02 board. The SC02/L emulates
> the Rl01/Rl02 disks, and the SC02/C emulates the RK06/RK07 disks.
>
> Looks to me, that the big difference is in software, because both of
these
> boards look very similar.

The boards are identical. The difference is in the firmware. If Emanuel's
information about an SC02/L is correct, then there at least *four*
versions, because:

    SC02/A RP11 emulation, compatible with RP02/3 disks
    SC02/B RH11 emulation, compatible with RM02/3 disks
    SC02/C RK611 emulation, compatible with RK06/7 disks

These are the only ones I've seen in Emulex docs. There are similar
versions of the SC03, which also has a /MS variant, which supports MSCP. I
assume there are similar variants of the SC12, which is the Unibus version.

However, the original enquiry was about a SCO210101-CXL, which is an
SC02/C.
Dan was correct.

-- 
Pete						Peter Turnbull
						Dept. of Computer Science
						University of York
Received on Tue May 04 1999 - 22:15:51 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:24 BST