VAXStation/MicroVAX 2000 stuff

From: CLASSICCMP_at_trailing-edge.com <(CLASSICCMP_at_trailing-edge.com)>
Date: Wed May 19 07:04:16 1999

>This seems to leave using the MicroVAX as a satellite unit to the
>VAXStation as the only alternative. Tried this, and MicroVAX tried to
>boot from ESA0 while cabled to the VAXStation, but no-joy. Is the
>problem that of not having things set up for cluster operation?

Right. There are databases that have to be built on the node the
satellites boot from, and the right software needs to be installed
there in the first place.

> If so,
>how do I do that?

If the VAXcluster software is installed, you log in as SYSTEM,
type _at_CLUSTER_CONFIG, and answer a few simple questions.
 
>Keep it rather basic, please. I am pretty ignorant about all this.

It's pretty easy. CLUSTER_CONFIG is a very friendly program, prompting
you along the way. You'll need to know the Ethernet address of each
satellite and establish some DECNET numbering scheme for your satellites.
The hardest part is thinking up six-character node names for each node :-).

Running a VMSCluster is very easy - it's only slightly more difficult
to administrate a cluster of several hundred nodes than one node. Compare
this with running a few hundred Linux or Windows boxes, a task that
takes an army of administrators.

-- 
 Tim Shoppa                        Email: shoppa_at_trailing-edge.com
 Trailing Edge Technology          WWW:   http://www.trailing-edge.com/
 7328 Bradley Blvd		   Voice: 301-767-5917
 Bethesda, MD, USA 20817           Fax:   301-767-5927
Received on Wed May 19 1999 - 07:04:16 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:25 BST