On 26 May 99 at 14:51, Frank McConnell wrote:
> ard_at_p850ug1.demon.co.uk (Tony Duell) wrote:
> > Most later workstations had SCSI interfaces for the hard disk (even if
> > they then broke that by insisting on an ST506 drive on the other side of
> > a SCSI->ST506 interface, as ICL and Torch both did). Some older
>
> Sun did this too. It wasn't 'til SunOS 4.0 that the SCSI-disk driver
> would actually talk to SCSI disks. Before that, it wanted to talk to
> an Adaptec ACB4000 or an Emulex MD21 (for ESDI disks).
>
> I think I remember reading somewhere that this was done because the
> SCSI-to-whatever interface had the intelligence for bad-block
> remapping. But I wouldn't be surprised to find that the cost of the
> drives had something to do with it; I remember Amiga folks scheming to
> use ACB4000 boards with their SCSI interfaces because it was cheaper
> than buying a SCSI disk, and I've opened a few Mac SCSI hard disk
> boxes to find the same sort of thing inside.
>
> -Frank McConnell
>
Atari ST hard drives had a weird similiar configuration driven by cost and
proprietary considerations I'm sure. The ASCSI (?) output from the ST was
converted by an ICD(company name) adaptor to SCSI and then an Adaptec
board converted that to either MFM or RLL. Dont want to open it up but ISTR
the main chip on the Adaptec board was a WD 1004S (?)
ciao larry
lwalker_at_interlog.com
Let us know of your upcoming computer events for our Events Page.
t3c_at_xoommail.com
Collectors List and info
http://members.xoom.com/T3C
Received on Wed May 26 1999 - 22:27:07 BST