--- CLASSICCMP_at_trailing-edge.com wrote:
> In the past few months, I've been heavily involved with upgrading
> some CAT scanners that date from the late 70's...
>
> The PC boards that make up the backprojector make use of a unique
> technology: the PC boards themselves are just plain old two-layer boards,
> with the actual PC traces carrying only power and ground. All the actual
> wiring is done by fine machine-laid wiring between pads, with all
> the wire layers "potted" in a plastic compound.
The last design a former employer did was with a technology derived from this,
Augat's Unilayer. We sent them gerber plots and a couple of weeks later (for
an outrageous sum of money), we got back ten VAXBI 68010-based communications
boards. Our break-even cost on a custom 10-layer (yes... DEC specified ten
layers) was in the neighborhood of 20-25 boards. We never sold out of these
VAX-BI units, so it was a worthwhile way to go.
The actual construction was of two "decals" with embedded wires. Once spun,
they were laid onto a perforated board and tacked down to small solder pads
next to the holes, most of which had spring inserts in them. One defective
board turned out to be a missing insert, thus, no electrical contact between
pin and wire. A quick fix. We did re-work these - there was one ECO of a
cut and a 1" jump. No fun, even with the microscope.
I still have the boards. One of these days, I'll scan them in with the
rest of our DEC<->IBM product line (PDP-11/04's in the *real* old days,
custom 68K boards to the end in the 1990's).
-ethan
=====
Infinet has been sold. The domain is going away in February.
Please send all replies to
erd_at_iname.com
__________________________________________________
Do You Yahoo!?
Bid and sell for free at
http://auctions.yahoo.com
Received on Mon Oct 04 1999 - 18:08:28 BST