pdp 8/e

From: Lawrence LeMay <lemay_at_cs.umn.edu>
Date: Wed Oct 6 14:39:05 1999

Well, the pdp8/e power sord was cut off, but there is a 2 foot long hunk of
wire. I suppose I'll just wire up a power connector, and they use a good
quality extension cable (someday). No rush on that...

The core memory planes were removed, of course. Looks like there were at
least 3 sets of core in this at one time. The foam along the side of the
case has pretty much vaporized and is all over the bus connectors. Whats
the general consensus (yeah right, on THIS mailing list i was a consensus...)
about removing versis replacing that foam?

And one front panel switch is gone, and another is present but broken. The
rest at least appear to click up/down properly.


Boards that were in my PDP8/e when I recieved it
===============================================
M8330
M837
M8655
M8360
M8350
VG DS (dont know the number)
M8655
M840
M849
M8310 Loose
M8300 Loose

G111 Loose. 2 of these
G233 Loose. 3 of these (too bad they didnt leave the core planes)

M935 2 of these, to connect the second bus

VG DS 505
VG DS 102
VG DS 101
VG DS 504
M8320

M847 YH Bootstrap Loader (32 words implemented via an array of diodes)
Received on Wed Oct 06 1999 - 14:39:05 BST