Zenith Z-90

From: awcl <awcl_at_awcoldstream.com>
Date: Fri Oct 15 17:00:37 1999

Tony , Thanks for the advice. I got mine running. There is a switch on
the bottom of the screen that sits with 110/220 setting called
normal/low. (what is it anyway??) I guess that had a contact problem.


And I am still looking for one. If you ......

And I do have few question too.

1. If monitor does not get fired up, computer wont't start up right? I
mean it reads floppy for about three seconds and lose the state and sits
idle. One I have is connected to a automatic calibrator. If every thing
goes right calibration head
moves back and forth and get the distance. If monitor does not get
power, it does
not do any calibration.


2. On the terminal there are two dip switches. one to set up like cr
with line feed and so on. One setting there is ZDS and ANSI. Do you
know what ZDS ( must be Zenith Data Syatems) maps to. Their own keyboard
mapping scheme, Communication or ....

tks again.

Anil


Tony Duell wrote:
>
> >
> > I guess, this is CPM based ( Do not ask me about CPM) Z-80 based
>
> Actually, it runs either CP/M or HDOS (I have both, with manuals).
>
>
Received on Fri Oct 15 1999 - 17:00:37 BST