Tandon TM 100 5 1/4" drives

From: Bill Sudbrink <bill_at_chipware.com>
Date: Tue Oct 19 13:36:21 1999

> Bill,
> Let me know if you need a copy of this. Thanks again for the C4P boot
> disks. The C4P-MF is coming along nicely. The power supply checks out
> and I'm pulling every socketed chip and reseating it during the
> cleaning.
> So far, I've found 5 chips with pins broken down inside the sockets.
> Fortunately, I was able to remove the pins from the sockets.
> Now I just need to pick-up some replacement 8T26 bus driver/receivers
> and then check all of those 2114s on the two 527 Ram boards and I'll
> be ready to fire this thing up. :)
> --Doug
Great to hear. Again, I hope that the disks survived the
trips through the airport metal detectors and that our
drives are aligned close enough for them to work. I have
a fairly large stash of untested 2114s if you can't find
any locally. Remember, you can always start out with only
one 527 board to see how things are going.

Bill
Received on Tue Oct 19 1999 - 13:36:21 BST