opening a Rl01 drive

From: CLASSICCMP_at_trailing-edge.com <(CLASSICCMP_at_trailing-edge.com)>
Date: Fri Oct 22 19:18:46 1999

>>> I choose to power it up, and I was able to open the top door. However,
>>> the FAULT light stays on, i cant lock the cover down anymore, and
>>> I can remove the disk pack (just lift the handle?). I'm chosing to leave
>>> the RL01 powered up for a little while, in case the electronics havent
>>> been powered on for a while, but I doubt that wil fix this problem.

>>I meant to say i CANT remove the disk pack.

>*Oh*.

Double-Oh: now I realize where you're at. You see the pack, you lift
the handle, but it doesn't come out. Well, this one's easy:

Start with the handle in the *down* position, against the pack.
You see the little semi-circular notch on the right-hand side of the
middle of the handle? Put your right thumb there. It's a little
slide mechanism, you push it to the left. Now, keeping the slide
slid to the left, you lift the handle.
It should "feel" different than before you slid the slide, and you'll
hear a ker-klunk as a lever mechanism disengages the magnetic hold-down
on the pack. Lift, and put the pack in its lid!.

Do the same to remove the lid from a pack.

Occasionally, you'll run across packs where the little slide mechanism
that operates the lever action is damaged, and there you've just got to
pull hard to get the pack out!

-- 
 Tim Shoppa                        Email: shoppa_at_trailing-edge.com
 Trailing Edge Technology          WWW:   http://www.trailing-edge.com/
 7328 Bradley Blvd		   Voice: 301-767-5917
 Bethesda, MD, USA 20817           Fax:   301-767-5927
Received on Fri Oct 22 1999 - 19:18:46 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:34 BST