On Thu, 28 Oct 1999, Richard Erlacher wrote:
> I got a question the other day, and it was one about which I have no clue.
> A friend glommed onto an IMSAI box with a North Star disk subsystem, the FDC
> for which is a model MDS-A4. He wants to know about whether it is capable
> of handling 8" drives. I didn't think to ask whether it had a 50-pin cable
> header on it. That would have been too easy. My recollection is that
> NorthStar systems had a hard-sectored 5-1/4" drive, usually from Micropolis,
> attached, and that one was pretty dense, but wouldn't do CP/M-standard
> (IBM-3740 SSSD) diskettes. Is that the case with this controller?
Run 8 inch drives - no, at least I've never seen it done. The controller
has a 36 pin header.
Drives - hard sectored yes (10 sector), but not Micropolis. Normally
Shugart SA-400's.
And no, the format is nowhere near the IBM-3740 spec...
I had to write a set of low-level device drivers for the North*Star
controller once upon a time... It is a unique (and frustrating) beast...
-jim
---
jimw_at_computergarage.org || jimw_at_agora.rdrop.com
The Computer Garage - http://www.computergarage.org
Computer Garage Fax - (503) 646-0174
Received on Thu Oct 28 1999 - 11:07:12 BST