>It goes into Q-Bus based PDP11 systems. I know it will work with
>an 11/73 and 11/83. It may work in other systems as well.
Are you sure of that? Unless the floating point chip (and socket)
on an KDJ11-A or -B is identical to the one which is used on the
KDF11-A and -B (and I don't think they are identical, since the one
for the KDF is a dual chip carrier), it won't work.
The FPF11 board has a ribbon cable which ends in a connector which
fits the Floating point chip socket of a 11/23, 11/23+ and 11/24.
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '_at_' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL:
http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
Received on Fri Sep 03 1999 - 17:34:26 BST