> Hello all, I've got an interface to an RRD40 in my VAX called a KRQ50 and
> it has two "ports". One connects to the RRD40 with a 15 pin or so cable,
> the other, I don't know. Then in the box of stuff that went with this is a
> terminator (green LED on the back) with the same D-shell connector as the
> RRD40. So I'm trying to figure out whether or not they went together. I've
> never seen such a terminator before.
>
Its a SCSI terminator and it goes with the RRD40. If the RRD40
is the only device on the SCSI bus you will probably need to
use it.
--
Dr. Mark Green mark_at_cs.ualberta.ca
Professor (780) 492-4584
Director, Research Institute for Multimedia Systems (RIMS)
Department of Computing Science (780) 492-1071 (FAX)
University of Alberta, Edmonton, Alberta, T6G 2H1, Canada
Received on Mon Apr 17 2000 - 12:51:06 BST