8-bit IDE

From: John Wilson <wilson_at_dbit.dbit.com>
Date: Mon Apr 17 14:56:02 2000

On Mon, Apr 17, 2000 at 12:33:04PM -0600, Richard Erlacher wrote:
> There's physical room for a SCSI, WD100x-05, and an 8-bit IDE on the 12 x 40
> hole wirewrap layout on the card I'm using. IF I can find two or three
> drives that work in 8-bit mode, that will be enough. They want to be thin
> 2-1/2" drives, though, else they'll stick too far out from the board.

Just stating the obvious: the 2.5" 44-pin connector uses a 2mm metric
grid, so if your WW area uses a regular 2.54mm grid it'll need some drilling.

John Wilson
D Bit
Received on Mon Apr 17 2000 - 14:56:02 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:41 BST