PDP 11-23 questions

From: ajp166 <ajp166_at_bellatlantic.net>
Date: Tue Aug 8 21:36:04 2000

From: healyzh_at_aracnet.com <healyzh_at_aracnet.com>

>Yes, $40-50 isn't bad, but as mentioned you've got to consider shipping,
>it will probably go for quiet a bit more.

Never ship a PDP-11... way to heavy.

>Ah, OK. I should have known there was a /23 equivalent of the dual and
>hieght /73's.

Yep! M8189 come in two flavors, the difference is the roms. The +(B)
boot MSCP while the older ones don't know the RQDXn Controller.

The 11/23+ (11/23B) was used in the BA23 box aka micro pdp11/53.

>> With RL01/2, RX01/2 and BA11S or N box that could be stuffed into a
>> small office rack, likely it's a 40, 48" or larger one.
>Hmmm, a 36" rack could be fun!!!

I've set up two RL02 and a RX02 in a 48" rack with BA11S and a few
filler pannels.

A 36" rack is very doable too. The RX02 is ~11in, the RL01/2 is ~12in
and BA11S/N boxes are ~6" you might get that in a 30" rack.

An 11/23 with 256kb and RL02s will run V7 if it's not the I&D version.

Received on Tue Aug 08 2000 - 21:36:04 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:44 BST