Rubber rejuvinent- Fedron

From: Russ Blakeman <russ_at_rbcs.8m.com>
Date: Fri Dec 22 10:01:18 2000

Hadn't heard that one before...I did have some MIL-S surplus that I bought
from a salvage sale on Ft. Knox and just finished it up but it was made by
the dame company that makes fedron. Good stuff and used a lot in my business
where I rework/repair any printer from an old Star SG10 to an AS/400
connected IBM 6262. Of course I use a lot of isopropyl and denatured alcohol
as well as lacquer thinner too but they're a little easier to acquire and
not as expensive. I got the military surplus for $3 for a quart, couldn't
pass that up even though the military listed it as past it's shelf life.
That stuff doesn't breka down or wear out - it's always good unless the can
is damaged.

-----Original Message-----
From: owner-classiccmp_at_classiccmp.org
[mailto:owner-classiccmp_at_classiccmp.org]On Behalf Of Bill Layer
Sent: Friday, December 22, 2000 9:15 AM
To: classiccmp_at_classiccmp.org
Subject: Re: Rubber rejuvinent- Fedron


On Friday 22 December 2000 08:37, you wrote:
> Fedron is just a brand name and there are others as well, all very good.

Rawnron, for instance..


--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++
|        .:Bill Layer:.         | Viking Electronics,Inc. 1531 Industrial St
|
|     .:Sales Technician:.      | Hudson, WI 54016 USA + 715.386.8861 x210
|
| b.layer_at_vikingelectronics.com |     http://www.vikingelectronics.com
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++
 "Telecom Solutions for the 21st Century" + Powered by Slackware Linux 7.1.0
Received on Fri Dec 22 2000 - 10:01:18 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:50 BST