If you look at:
ftp://zane.brouhaha.com/pub/dan/emulex_uc07_08/
you will find just about everything you need. The UC07/08 is the Qbus
version but the switch settings and firmware is the same for both. I have
several here and use them in my test beds.
If you need anything else from the manuals let me know and I will post them
as well.
If you upgrade your firmware to M or P it will support CD's as well. The
HEX files are there as well.
BTW: Thanks go to Zane for hosting this stuff for me.
Dan
>Another question to ask, I got an Unibus SCSI card, and I know that
>it can be configured as either a tape controller or a disk controller.
>Currently it is configured as a disk controller, but I would like
>to know which switch settings change it into a tape controller.
>
>There is are 2 switch banks on the card, one with 10 switches, and
>one with 4 switches, which is placed at the top. Furthermore, there
>are 4 jumpers which can be set/removed.
>
>BTW, the card is an Emulex UC17.
>
>It works perfectly, yesterday I did build RSX 4.6 onto an Iomega
>jazz drive. It only uses 600Mb out of the 1Gb though.
>
>Thanks,
>
>Ed
>
>--
>The Wanderer | Politici zijn gore oplichters.
>quapla_at_xs4all.nl | Europarlementariers:
>zakkenvullers
>http://www.xs4all.nl/~quapla | en neuspeuteraars.
>Unix Lives! windows95/98 is rommel! |
>'97 TL1000S | WEG MET DE TOLPOORTEN!!
Received on Sun Dec 24 2000 - 13:49:40 GMT