RX01 Bootstrap Loader

From: Allison J Parent <allisonp_at_world.std.com>
Date: Sat Feb 12 21:41:27 2000

<KL11 setup: addr: 777560 , vector: 60.

That is a majik address. 176560(16bit address) and vector 60 is the
default console for any KL/DL or similar device. It is insensitive to
what the device generally is but the basic status and registers must be
there. RT-11, XXDP and friends expect it unless the particular copy
was built for an odd address, then console ODT (for those that have it)
will not be available and the console cannot control booting. Not a good
idea to do that by the way and you can only do it on the non-microODT
processors.

Also RT-11 (any version I have played with) MUST have 8kw of memory, again
you can custom build for smaller but for limited application only. The
smallest almost OS was the IOX package (IO Executive) for embedded apps,
the Micropower pascal system could build for small memories.


Allison
Received on Sat Feb 12 2000 - 21:41:27 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:53 BST