Available in San Antonio, TX, moderately boring stuff.

From: Ernest <ernestls_at_home.com>
Date: Sun Feb 13 22:44:28 2000

Check my posting on the ATT 6300/Xerox 6400. It shows a pin map of the video
cable for the monitor. I'm not an electrician but it looks like pins 24 and
25 are the hot ones, at least on the card for sure.

I've based the advice on my own experience, which could be pure coincidence
but now, I unplug the power to the video card when I use a color monitor. I
have collected eight of the 6300s, and in each case, the color monitors have
the power connector unplugged at the video card. Maybe that was coincidence
too.

Ernest

-----Original Message-----
From: owner-classiccmp_at_classiccmp.org
[mailto:owner-classiccmp_at_classiccmp.org]On Behalf Of Joe
Sent: Sunday, February 13, 2000 7:55 PM
To: classiccmp_at_classiccmp.org
Subject: Re: Available in San Antonio, TX, moderately boring stuff.


At 12:25 AM 2/14/00 +0000, someone wrote:
>
>[AT&T6300]
>> The monochrome monitor does get it's power from the video card but if you
>> open the case, and unplug the little orange/black power plug off of the
>> video card, you can then plug the AT&T color monitor into it. If you
don't
>> unplug the video power plug first, you will melt your color monitor. If
you

   No, you're wrong. Three of my close friends bought the 6300s when they
were new and one of them had the color monitor. You only had to unplug the
monochrome monitor and plug in the color one. NO other changes were needed.

    Joe
Received on Sun Feb 13 2000 - 22:44:28 GMT