scroungers -- a new chalenge

From: Technoid_at_cheta.net <(Technoid_at_cheta.net)>
Date: Sat Feb 19 11:56:36 2000

I have used a vice to crimp connectors but for card-edge connectors I just
stand of the connector with just the heel of my boot and rock slightly.
It is hard to do that way with the header-type connectors without breaking
the locks off. You can use superglue if you do.... Caution with a vise.
I bent the handle on a friend's one time trying to crimp a scsi header
onto some rainbow-colored cable I have. This cable has a little bit more
insulation than is normal and it was hard to get throug. --
-----------------------------------------------------------
Jeffrey S. Worley
Technical Services
Bits & Bytes Computer Services Inc.
1979B Hendersonville Road
Asheville, NC 28803
828-684-8953 - voice 0900-1700 five days
828-687-9284 - 24hr fax
Who is General Failure and why is he reading my hard disk?
Technoid_at_Cheta.net
-----------------------------------------------------------
Received on Sat Feb 19 2000 - 11:56:36 GMT