I'm using 4.1, and when I use BRU from brusys, I get the message
that the target may not be a bootable system.
Ed
CLASSICCMP_at_trailing-edge.com wrote:
>
> >I have a bit of a weird problem, I'm trying to make a 2nd bootable
> >system disk containig RSX-11M+.
> >
> >I have an 11/83 with 2 RD53's and 1 RD54, and the system is on one
> >of the RD53's. I booted [6,54]brusys.sys and then used DSC to copy
> >the contents to the 2nd RD53. DSC did not report any error.
> >Then when trying to boot du2 (the 2nd RD53), nothing happens besides
> >a number of retries to access the boot information.
> >
> >DSC is supposed to copy the boot information as well as the data,
> >so I'm wondering what I do wrong.
>
> Which version of 11M+ are you using? DSC became "unsupported" in recent.
> versions, the "supported" way of doing what you want is BRU. DSC isn't
> even included in the last few binary releases.
>
> (Thank the heavens that you aren't having to deal with PRESERV or
> ROLLIN!)
>
> --
> Tim Shoppa Email: shoppa_at_trailing-edge.com
> Trailing Edge Technology WWW: http://www.trailing-edge.com/
> 7328 Bradley Blvd Voice: 301-767-5917
> Bethesda, MD, USA 20817 Fax: 301-767-5927
--
The Wanderer | Geloof nooit een politicus!
wanderer_at_bos.nl | Europarlementariers: zakken-
http://www.bos.nl/homes/wanderer | vullers en dumpplaats voor
Unix Lives! windows95/98 is rommel! | mislukte politici.
'96 GSXR 1100R / '97 TL1000S |
See http://www.bos.nl/homes/wanderer/gates.html for a funny pic. of
Gates!
Received on Mon Jul 03 2000 - 14:41:04 BST