Greetings,
Thanks for the help with the 1000E's PSU!
On 17 Jun 2000, Frank McConnell wrote:
[...]
> board your power supply is missing is p/n 5061-1349, the battery
> backup board, which is only present in 1000Es with the battery
Good; I won't have to go hunting down a missing board. :-)
> backup option. To confirm this, there should be another board,
[...]
I'll look for this.
> Looks like the installer is expected to adjust the power supply with it
> installed in the computer. Test points are on the crossover assembly
Just to be on the safe side, I'll try it out of the computer first if
it will work with no load just to make sure that there aren't any bad
spikes or voltages way too high - using something else to load it if
necessary. If ok, then I'll reinstall the PSU and make any necessary
adjustments.
[voltages, test points, adjustments]
Ok, I'll check those to see which ones aren't working or are out of
spec., if the fans are running, etc.
> Feel free to ask questions, I'll keep the manual out for the next few
> days.
Will do. Thanks!
--
R. D. Davis
rdd_at_perqlogic.com
http://www.perqlogic.com/rdd
410-744-4900
Received on Sat Jun 17 2000 - 21:52:09 BST