Tony Duell wrote:
>
> > >
> I thought the 9153 used the half-height drive with the 34 pin connector.
> I've never pulled one apart, but I have the 9154 (same unit _without the
> floppy drive_) on my HP150-II and it certainly appears that such a drive
> would drop in.
>
> A 9133 uses the full-height drive that we've been discussing, though. As
> does the 9114A HPIL drive.
Tony,
I believe that you are right about the 9154. That brings to mind another
question about that drive. My 9154 has a half height 3.5" Sony drive
with the 34 pin connector. However, there is no power connector for the
floppy. Other Sony floppies that I have seen have the 34 pin connector
and an extra 4 wire power connector. Can I use other floppies on the HP
drive? I tried one last night and the 9154 would not even power on with
a standard Sony floppy (the fan would not even come on).
On a related note, the hard disks in the 9154 are supposed to be 20MB
3.5" SCSI drives, but they use a smaller connector that I am not
familiar with, and again no power connector. Is there some standard for
SCSI that came before the normal SCSI-1 type connector or did HP do some
proprietary type of connector?
Thanks,
-Pete
--
Pete Johnson pete_at_atc.creative.com
Creative Advanced Technology Center (831) 438-5331 x111
269 Mt. Hermon Rd. Suite 101 (831) 438-8509 FAX
Scotts Valley, CA 95066 (831) 251-5331 Cell
Received on Tue Nov 28 2000 - 16:06:14 GMT