Sean Caron wrote:
>
> ----- Original Message -----
> From: "no" <oliv555_at_arrl.net>
> To: <classiccmp_at_classiccmp.org>
> Sent: Wednesday, October 18, 2000 9:05 PM
> Subject: BA23 w/RA70
>
> > Well I've got this empty BA23 and enough boards to put
> > together a MVIII/kda50. What I don't have is the RA control
> > panel.
> >
> >
> > nick o
> >
>
< snip >
>
> Do I need anything else besides the card and the drive (like this RA-series
> control panel mentioned in the previous message)? How are the drives
> cabled to the card? Is the cabling something relatively straightforward that
> I could put together myself?
>
> --Sean Caron (root_at_diabloent.net) | http://www.diablonet.net
There are two cables and a junction block. The card-to-block cable
is p/n 17-00951-03; number on j-block is 70-25405-01 but this is for
the BA213 and I don't believe will fit the BA123.
The drive-to-junction block cable is the one that I am still missing.
Don't have a number for it either, maybe a list member with this setup
can provide a p/n? Otherwise i will end up building my own.
It's been a real chore digging up this info from the Compaq site. I just
completed a project at work where I replaced the RA60s on our 11/785s
with the SA72 (SABB) data arrays. Had the same problem getting the
correct cables for that assembly.
nick oliviero
Received on Thu Oct 19 2000 - 18:43:36 BST