Need bezel for DEC TLZ06-AA

From: Adrian Graham <agraham_at_ccat.co.uk>
Date: Tue Sep 5 04:20:43 2000

IIRC the only full-height TLZ06 was the TLZ6L autoloader; the full height
TLZ04 was an option on the R400X expansion box though, but it was a proper
full height drive and not a half height hiding behind a big bezel!
For PC mounting it should slide straight into a standard removeable drive
bay and connect to any 8 bit SCSI card, for a uVAX II it'll have to be a
hack since the only supported drives in those were TK50/TK70 that connected
to their own controller cards (TQK50 and TQK70). The (I think) KFQSA was a
v.expensive quad-height QBUS SCSI card but I think it only had external
connections.....I can dig out some old books if it'll help.

a

> -----Original Message-----
> From: Clint Wolff (VAX collector) [mailto:vaxman_at_uswest.net]
> Sent: 04 September 2000 00:40
> To: classiccmp_at_classiccmp.org
> Subject: Need bezel for DEC TLZ06-AA
>
>
>
> Hi,
>
> I recently purchased a few DEC TLZ06-AA DAT drives, and they arrived
> today. Unfortunately, The bezel on them is the width of a 3.5" drive,
> but the height of a half-height 5 1/4" drive.
>
> Does anyone know where I can get normal 5 1/4" bezel for them?
> Any suggestions on how to mount them in a PC and a uVAX II?
>
> Thanks,
> clint
>
Received on Tue Sep 05 2000 - 04:20:43 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:19 BST