RK05 transport tips ?

From: Daniel T. Burrows <dburrows_at_netpath.net>
Date: Thu Sep 21 16:47:01 2000

>For the RLs, there's a similar clamp somehwere on the positioner. I think
>you have to take off the access cover (4 screws on top), lift the door at
>the back edge slightly and release the catch. Then take the door off.
>Lift the R/W PCB in its screening box (middle of the back section of the
>drive) and flip it over towards the right side of the unit. Then examine
>the head positioner for a locking clamp and move it so as to lock the
heads.


Correction: There is a small plate in the front (acessable with pack
removed) help in place with 1 small screw that you swing up in front of the
heads. There are also 2 or 3 screws that you install in the bottom of the
drive to lock the motor in place.


Dan
Received on Thu Sep 21 2000 - 16:47:01 BST