Ever take a MicroVax through the car wash??

From: ip500 <ip500_at_home.com>
Date: Tue Apr 3 20:37:01 2001

        While I doubt that modern [or even antique] computers could take much
water ... I have on occasion run a complete communications receiver
[usually military types] through the dishwasher cycle. After a couple of
days bakeout at 150 degrees they are as good as new [and a lot
cleaner!].
        This technique is reserved for the worst of the worst .. ie: caked
on grease that no amount of hand wiping would ever remove. AND ..these
were tube type / vintage sets .. very rugged indeed.
        Craig

Sellam Ismail wrote:
>
> On Tue, 3 Apr 2001, Chad Fernandez wrote:
>
> > What kind carwash do you recommend.... the kind with brushes, or
> > no-touch? Will the brushes leave scratches in the finish? :-)
> >
> > Kidding.... Actually I just took the plastic case from my 3400 up the
> > do-it-yourself car wash. I used the engine/tire cleaner on it, and then
> > Comet Cleanser. It turned out nicely..... it is drying now. Usually I
> > do this kind of thing in the bathtub, but since the Microvax case is
> > quite a bit larger than a PC, I decided to do it outside. Since I live
> > in an apartment..... that meant the carwash. The high pressure hose was
> > nice :-)
>
> This is one of the funniest things I have ever heard of :)
>
> Sellam Ismail Vintage Computer Festival
> ------------------------------------------------------------------------------
> International Man of Intrigue and Danger http://www.vintage.org
Received on Tue Apr 03 2001 - 20:37:01 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:23 BST