Well, assuming (of course) that there might be some new folks out here on
this list...
Does anyone have anything (disks, info, manuals, proggies, peripherals, I
mean anything) for a Hewlett Packard 64000 system?
I purchased one of these late last summer (it has a QIC tape drive & an
Eprom burner, but methinks the burner only supports 2708's & 2716's) and it
passes diagnostics, but I think they were hooked up in network mode & it
was netbooted... so I really can't do much of anything with it right now...
Here's a list of the boards I have in it, and other specifics:
Hp 64100A mainframe
sn# 2033a01075
2 rs232c ports
(to modem/to peripheral)
current loop
4 bnc ports
300 w. Power supply
internal:
slot a: (red) i/o
slot b: (white) dspl ctrl
slot c: (blue) cpu
slot 0: 64940a (tape)
slot 1: 64501a (prom)
slot 2: (empty)
slot 3: (empty)
slot 4: (empty)
slot 5: (empty)
slot 6: 64153a (mem.16k)
slot 7: 64151a (mem.con)
slot 8: 64300a (int.anl)
(internal analysis)
slot 9: 64211a (em 6800)
The board in slot 9 is a Motorola 6800 emulator, so you can crossassemble
6800 ML proggies & burn them to an eprom... We used these in concert with
the Heathkit 6800-based trainers (one of which I'm still looking for...)
back in college.
Webpages, FAQ's, any info at all about this critter would be most appreciated.
Thanks in advance,
Roger "Merch" Merchberger
--
Roger "Merch" Merchberger --- sysadmin, Iceberg Computers
Recycling is good, right??? Ok, so I'll recycle an old .sig.
If at first you don't succeed, nuclear warhead
disarmament should *not* be your first career choice.
Received on Thu Apr 05 2001 - 15:10:06 BST