One More PCB Dishwasher Question

From: Pete Turnbull <pete_at_dunnington.u-net.com>
Date: Fri Dec 28 04:28:03 2001

On Dec 27, 7:03, lee courtney wrote:

> Many of the HP cards have paper stickers indicating
> part number, revision, etc. Any thoughts on preserving
> these through a dishwasher cycle? Or should I just
> gently hand rinse? THanks!

Hand rinse will do almost as much damage to some labels as the dishwasher.
 If I wanted to preserve the labels, I would try to take them off. Before
you do any of this, make a note of what each one says and exactly where it
was!

If they're really old, and the glue has dried out, they may come off quite
easily, with a little assistance from a scalpel blade or a thin knife, slid
under the label. If they're not quite so dried out, white spirit or label
remover may soften the glue enough for you to peel them off carefully. Try
a corner of *one* first, in case your solvent makes the ink run. Be
patient, it takes a while.

-- 
Pete						Peter Turnbull
						Network Manager
						University of York
Received on Fri Dec 28 2001 - 04:28:03 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:41 BST